Table of Contents
Advertisement
DMT-8v1 Owner's Manual (Before operating the DMT-8v1)
4. The difference between a tape-based multtracker and a hard disk multitracker.
The DMT- uses а hard disk as the recording media. Recording
and playing
back data on the DM-8 is slightly diferent than on а conventional tape-bated
multitracker.
On a tapebased muititracker, you can play the tape from any point between the
beginning and the end of the tape as shown below. However,
hard disk recording
Allows you to play between the ARS time (absolute time) - that is, ЧУ", and the
"END" point. (The end point represents the end of the recording.) You could make
'the analogy that the ОМТ Ви, has a built-in tape with a maximum duration of 12-
'minutes (when Installing the SOME hard disk unit). И you made а five-minute
recording, you would work with a five-minute tape; И you recorded one additional
'minute, t would be like using a sbminute tape.
The Program Change function of the DMT-8 allows you to record and edit up to
fave songs individually on the builtin hard disk. This can be described with the
analogy of individual rooms as shown below, where you can recor, play back, and
'edit in each room without giving any influence to the other rooms.
CD
ا
rm e) Кня
-4
One of the important things here is tha the total recording time for five Programs
is 12 minutes using the standard built-in hard disk. (If you replace the hard disk,
he total time would be the maximum recording time of the new hard disk.) That
is, if you record 12-minutes (when installing the S40MB hard disk unit) of data in
one Program, you cannot record any more data in the other Programs, (If each
song is three minutes long you can record each song in five Programs.)
ler o be eng
иона rhon
Provan Cange hon.)
36
Advertisement
Table of Contents
