Table of Contents
Advertisement
(Time Base:
'The DMT-SVL uses time display (ARS or MTC) or Bar/Beat/Clock display to indicate
'the current position of the recorder section. These displays are called "Time Base"
ARS (Absolute Time) shows the absolute time of the disk, and MTC (MIDI Timecode)
hows the relative time obtained by adding an MTC offset value to the ARS value.
Bar/Beat/Clock (BAR 4 /CLK) indicates a position within а plece of music and
'conforms to the MIDI clock and Song Position Pointers created on the internal Tempo.
Map.
[Se
as
ee
te
"Rae page mare на
Tae bare
аз. Executa/Yes
key [EXECUTELYES)
Pres this key to execute the operation when you try to edit data on the hard disk
Wusing the edit functions such эл Paste and Erase, when you put the DMT-hv into
SETUP mode, or when you set the parameters in the SETUP menu.
Pressing the DISP SEL key while holding down the EXECUTE/YES key allows you to
'select the Time Base. (Refer to the explanation about the DISP SEL key.)
"a ра EF төт remet aiam P еу Pat инт
'Rare раја P erm irat tcu ca Pi ty SETUP ae.
ч. Exit көумө key [EXITNO]
Contrary to the EXECUTE/VES key, this key is used to stop the operation,
"ae sag" tv mero rr sen arg кө өн tr ma Pae necne
а
age TO tr or тт шм car ita b SETUP m
24
Advertisement
Table of Contents
