DMT-8vı Owner's Manual (Names and Functions)
Names and Functions
«Top panel (Mixer section)--
3 INPUT faders [а]
The INPUT faders control the input level of the signal selected via the
INPUT SEL switch (that is, the input signal from the INPUT jack, or the
recorder output signal). Level 7 or 8 is a standard level, and a gain of
about dB wil be obtained with level 10.
"The LEVEL switches are set according to the output level of the devices
'connected to INPUT jacks 1-2. The option is -SOBV (L), ЗОБУ (M), and
ЛОБУ (Н). To connect а low output device such as a microphone, use
AOL Т Spal Pact ааа
1
SE
TEE
et вагон зае
Won | с=т раната cin
D
6. Monitor Level Control knob [MON]
This knob allows you to select the signal that wil be sent to the monitor
section L/R, and adjusts the signal level.
"Pte sat Te at эле tom тє төл eat ected by he NPT ader
14