Table of Contents
Advertisement
DMT-8v1 Owner's Manual (SETUP mode)
13. Setting a digital output channel ("dG out")
Using "dG out" of Setup menu, you can assign any of analog outputs 1-8 to
digital output Lor R. Select any one combination
from
" 1 - 2 " , "3-4", "5-6",
17-8", 54" (stereo output L R in the mixer section).
'This assignment will allow you to record digital data from the DMT-&vi's
DATA OUT to an external digital device (such as DAT, MD, etc.)
This setting will be shared by all Programs.
The default setting is "St". Turning the power off will set this setting to
default.
1. Press the DISP SEL key to select "SETUP" and press the EXECUTEYES key.
3. Use the JOG dial to select from "1-7, "3-4, "47, 7-8, "84.
4, Press he EXECUTE/YES
key again.
The display in Sep 1 wil appear, and е setting в complete
5. Press the STOP button or the EXITINO key to quit Setup mode.
e
The уш ouput wl be mete i Be овоме stuns. А ті m, he UR ev
meter wet respond.
1. nen me OMT аа la ln LOAD mode, or
2 When any cne аа поза ie a DIGITAL IN
131
Advertisement
Table of Contents
