Table of Contents
Advertisement
Installing battery
Before connecting the bat-
tery, switch off the ignition.
To avoid short-circuits:
• Connect the positive battery
lead (+) 3 first
• Close the protective cap 2
for the positive battery pole
– Never install the battery
without the protective cap
• Connect the negative bat-
tery lead (—) 1
1
• Installation is the reverse of
the removal procedure
Disconnecting the battery
deletes all entries (e.g. faults,
settings) stored in the Motronic
control unit's memory.
Loss of settings can temporarily
impair the operating
characteristics when the engine
is restarted.
• Switch on the ignition
• Fully open the throttle once or
twice
– The Motronic registers the
throttle-valve positions
Battery
3
2
2
53
Advertisement
Table of Contents
