Table of Contents
Advertisement
3
• Use a screwdriver to push in
1 retaining lug 6 on the left
and one on the right and take
apart the bulb socket
• Pull the H3 bulb out of the
lamp ring 8
• Installation is the reverse of
the removal procedure
– High beam headlamp:
H3 12 V 55 W
When installing, align the H1
bulb such that the slots 7 on
the bulb socket slide into the
guides in the lamp ring 8.
Changing bulbs
4
10
9
8
7
When assembling the bulb
socket, align the slot 10 on the
lamp ring 8 such that it is point-
ing towards the bulb socket
guide 11.
Make sure the retaining lugs 6
engage.
When inserting the bulb socket
into the headlamp, ensure that
the grounding strap 9 engages
in the two slots 4.
5
11
12
6
2
43
Advertisement
Table of Contents
