Table of Contents
Advertisement
• Place motorcycle on main
(center) stand
• Remove system case
• Take off complete two-sec-
tion dualseat
• Remove bolt 9 and take off
side section 8
• Carefully pull off turn indica-
tor/mirror housing and hold
• Turn the bulb holder counter-
clockwise to release it, and
pull it out
Watch different bolt lengths.
• Unscrew mounting bolts 1 to
7 and 10 to 19
• Carefully remove entire side
trim
• Assembly is performed in
reverse order
• To ease installation of the turn
indicator/mirror housing,
grease the retaining clips
lightly
Removing side trim
First press in turn indicator/mir-
ror housing by striking gently.
After installing, always check
that it is firmly located.
The right-hand side trim should
be removed in the same way.
2
35
Advertisement
Table of Contents
