Table of Contents
Advertisement
The [Auto brightness] setting will automatically adjust the performance
display's brightness level based on the surrounding ambient light level.
When using the [Auto brightness] setting, adjusting the [Brightness bar] will
add an offset value to the current brightness.
Note:
If your performance display is configured to be part of a shared display
group, the [Brightness bar] and [Auto brightness] setting can be used
to simultaneously adjust the brightness level of each compatible
device assigned to the same group. For more information on how to
configure your performance display's display group settings, refer to:
p.56 — Display group settings
In order to change the brightness:
1. When viewing a data page, swipe down from the top edge of the screen
to display the [Overlay menu].
2. Manually adjust the screen brightness via the [Brightness bar], or select
[Auto] to automatically adjust the performance display's brightness level
based on the surrounding ambient light level.
Changing color modes
In addition to the default [Color mode (Day)] configuration, the performance
display can also be configured for night time use via the available [Color
mode (Night)] setting.
Important:
If you are using the [Color mode (Night)] setting at night, be aware that your
vision may be compromised when reverting back to either the [Color mode
(Day)] setting or a display screen with a higher level of brightness.
Note:
The [Color mode (Day)] and [Color mode (Night)] settings are applied
globally to all compatible devices in the system, and will therefore
automatically synchronize with any networked multifunction displays /
chartplotters and daisy-chained performance displays.
18
In order to change between color modes:
1. When viewing a data page, swipe down from the top edge of the screen
to display the [Overlay menu].
2. Select between [Color mode (Day)] and [Color mode (Night)].
Color mode (Day)
[Color mode (Day)] — the default color mode, which uses standard light
(default) or dark colors (intended for day use).
[Color mode (Night)] — the non-default color mode, which uses red text and
icons on a darkened background screen (intended for night use).
Note:
For information on how to configure your [Color mode (Day)] color
scheme, refer to the information found in the following section:
p.56 — Daytime color settings
3.8 Software updates
The software running on the product can be updated.
• Raymarine® periodically releases software updates to improve product
performance and add new features.
• The software on many products can be updated using a connected and
compatible multifunction display (MFD) / chartplotter.
• Refer to
www.raymarine.com/software
the software update procedure for your specific product.
Color mode (Night)
for the latest software updates and
Advertisement
Table of Contents
Troubleshooting
