Hybridtouch Overview; Basic Touchscreen Operations; Touchscreen Overview - Raymarine e 7 Quick Reference

6. Power — press once to switch the unit ON. Once powered on,
press the Power button again to adjust the brightness, access
the power controls for external devices, and access the autopilot
controls. Press and hold to switch the unit OFF.
7. Chart card slots — open the card door to insert or remove
MicroSD cards. There are 2 card slots (labelled 1 and 2), used
for electronic charts and archiving waypoint, route and track
data.

Hybridtouch overview

Your multifunction display features Hybridtouch, which enables you
to operate the unit using the touchscreen and the physical keys.
Many common functions can be accessed using the touchscreen.
However, there may be situations (such as rough sea conditions)
when it is not appropriate to use the touchscreen. In these situations,
Raymarine strongly recommends that you activate the touch lock
and use the physical keys to operate your multifunction display.

Touchscreen overview

The touchscreen provides a quick way of performing many common
functions.
Some of the functions you can operate with the touchscreen include:
• Accessing applications.
• Adding and editing applications pages.
• Placing and editing waypoints.
• Building routes.
• Panning the chart display.
• Placing and moving the cursor.
6
Note: Raymarine strongly recommends that you familiarize
yourself with touch operations while your vessel is anchored
or moored. You may find it helpful to use the simulator mode
(accessible from Homescreen > Set-up > System Settings)
in these situations.

Basic touchscreen operations

Placing and moving the cursor using touch
1. Touch the screen at any position on the screen to place the
cursor there.
Selecting the active window using touch
With a page featuring multiple applications displayed:
1. Tap anywhere inside the application you want to make active.
A border appears around the application, indicating that it is
active.
Locking the touchscreen
With the homescreen displayed:
1. Select the Touch Lock icon.
It changes color to indicate that the touchscreen is disabled. All
functions are still available using the buttons and UniControl.
Unlocking the touchscreen
With the homescreen displayed:
1. Use the UniControl to highlight the Touch Lock icon.
2. Press the OK button.
The Touchscreen is enabled.
e7 / e7D Quick reference