Honeywell Air Alert 96d User Manual page 23

The information screen also displays icons representing certain sys‐
tem functions. Here is a list of possible icons and their meaning:
Icon
BACNet: Indicates that there is a BACNet module present and
that it is communicating with the controller.
BACNet error: Indicates that a BACNet module is present but
communication with the controller has failed (error)
Debug: Indicates whether the controller is in debug mode
(Single TX, Debug or Simulation modes). When in simulation
mode, SIM appears next to this icon.
Log: Indicates that either "Tx Logging" or "Event logging" is
enabled.
Log error: Indicates that an error occured during TX or Event
logging. All logging functions are stopped.
SDC: Indicates that an SDcard is present and functionning. The
icon "fills" (from white to black) progressively as memory is
used. A white icon indicates empty memory and black indicates
full memory.
SDC error: If this symbol persists for more than 5 seconds, an
SD card card is present but not functioning properly.
Wireless network: Indicates that the wireless network
coordinator (wireless communication module) is present and
communicating with the controller.
Wireless network error: Indicates that the wireless network
coordinator (wireless communication module) is present but is
not communicating with the controller.
Description
23