The Tests menu provides four main options, divided between two
screens. Each of these options offers different capabilities. The first
screen presents three options:
Option
Test sequence
Start Sim
Sequence
Maximum load
The second screen option is "Oprt Mode", which offers three separate
operation settings: Normal, Single Tx or Debug.
Setting
Normal
Normal controller operation mode
Single Tx
Activates the polling mode on a single transmitter.
Activates the service mode to perform a calibration and to
Debug
test Events without triggering actions.
Enables each output to be activated and validates
operation of each controller keypad buttons, dis‐
play pixels, and various communication protocols.
This options starts or stops the Simulation mode,
which allows a simulation of a gas concentration
over an associated scale range on all transmitters.
The simulated gas concentration values are local
(on the controller) and do not affect logging func‐
tions. (Events will be activated for the simulation
but detection devices are not affected.)
Activates all controller components
68
Description
Description