Surface Mount Installation - Honeywell Air Alert 96d User Manual

Surface Mount Installation
It is recommended that controllers be installed 5 feet (1.5 m) above
the floor, at approximate eye level.
Mark the holes as shown:
 Height markers 6 13/32" (16.3 cm) apart
 Width markers 10 9/16" (26.8 cm) apart
 Pre‐drill 1/4" mounting holes as needed
 Securely mount the controller using the appropriate screws
Wiring for the unit must be passed through the knock‐outs provided
at the bottom of the unit.
11