BenQ AQCOLOR SW Series User Manual page 57

Item
Color 5000K
Temperature
6500K
9300K
User-K
User-RGB
Gamma Adjusts the tone luminance.
Color Gamut Adobe RGB
sRGB
Rec. 709
DCI-P3
Hue Adjusts the degree of how we perceive colors.
Applies a color tint (cool or warm) to the
image. Color temperature is measured in K
(Kelvin) degrees. The display becomes
reddish if the color temperature is low, and
becomes bluish if the color temperature is
high.
Some color gradations may not be displayed
well if this the setting has been adjusted.
Allows to adjust color temperature by 100K. 5000K ~
The blend of the Red, Green and Blue
primary colors can be altered to change the
color tint of the image. Go to the succeeding
R (red), G (green), and B (blue) menus to
change the settings.
Decreasing one or more of the colors will
reduce their respective influence on the
color tint of the image. (e.g. if you reduce
the Blue level the image will gradually take
on a yellowish tint. If you reduce Green, the
image will become a magenta tint.)
Suitable for Adobe® RGB compatible
peripherals.
Suitable for sRGB compatible peripherals.
For better color matching representation
with Standard Rec. 709.
For better color matching representation
with Standard DCI-P3.
Some color gradations may not be displayed well if this the setting
has been adjusted.
Function
57
Range
9300K
• R (0~100)
• G (0~100)
• B (0~100)
• 1.6
• 1.8
• 2.0
• 2.2
• 2.4
• 2.6
• sRGB
• R
• G
• B
• C
• M
• Y