BenQ AQCOLOR SW Series User Manual page 43

All OSD (On Screen Display) menus can be accessed by the control keys. You can use the
OSD menu to adjust all the settings on your monitor. Available menu options may vary
depending on the input sources, functions and settings.
1
1. Press the 5-way controller.
2. The main menu is displayed.
3. On the main menu, follow the on-screen icons on the bottom of the menu to make
adjustments or selection. See
menu options.
Customizing the Function Key
1. Press and hold the Function Key for 3 seconds until the Monitor Function Key setup
menu is displayed.
2. In the sub menu, select a function that can be accessed by this key. A pop-up message
will appear, showing that the setup is complete.
Custom Key
Monitor Function Key
IR Channel Setting
Shortcut 1,2,3
Looping Key
Dial
Back
Apart from the control keys on the monitor, the Shortcut key 1/2/3 on the Hotkey Puck G3 work as hot keys
as well. Press and hold one of the Shortcut keys (1/2/3) for 3 seconds to bring up a list of options, select
another feature of setup menu by pressing
Hotkey Puck G3 on page 46
Navigating the main menu on page 53
Color Mode
Channel 1
Color Mode
Brightness
Move
or
for more information.
43
2
Display
Exit
Brightness
Contrast
Input
Color Mode
Input
Color Temp.
Gamma
Color Gamut
Confirm
, and confirm with
Color Mode：Adobe RGB
USB-C
Input USB-C
Full
Aspect Ratio
Move Edit
for details on the
Color Mode：Rec.709
USB-C 3840x2160
. See Customizing your
3840x2160 30Hz
60p