BenQ AQCOLOR SW Series User Manual page 25

2. Connect the PC video cable
The video cables included in your package and the socket illustrations on the right may vary depending on
the product supplied for your region.
1. Establish a video cable connection.
• Connect the plug of the HDMI cable to the HDMI port on the monitor.
• Connect the plug of the DP cable to the monitor video socket.
• Connect the plug of the supplied USB-C™ cable to the USB-C™ port on the monitor.
2. Connect the other end of the video cable to an appropriate port of a digital output source
(e.g., a computer).
(DP input only) After the monitor and the computer are powered on, if the image is not displayed, disconnect
the DP cable. Connect the monitor to any video source other than DP first. Go to System and DP on the OSD
menu of the monitor and change the setting from 1.4 to 1.1. Once the setting is done, unplug the current
video cable and re-connect the DP cable. To go to the OSD menu, see
operations on page
To keep the monitor stable, hold the top when
connecting/disconnecting cables.
or
42.
or or
25
5-way controller and basic menu