Table of Contents
Advertisement
No.
Name
2
Dial key
3
Exit key
4
Information key
5
Shortcut key 1
6
Shortcut key 2
7
Shortcut key 3
8
Channel switch
(If no menu is displayed)
• Turn right or left to adjust Brightness by default. To
change the default settings, press and hold for 3 seconds
to bring up the setup menu to change the default setting.
Alternatively, go to Custom Key > Dial on the monitor.
• Press to bring up the main menu.
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page
• (When the monitor is turned off) Press and hold for 3
seconds to turn on the monitor.
(On a menu)
• Turn right to scroll down the menu.
• Turn left to scroll up the menu.
• Press to confirm the selection.
(If a control bar is displayed)
• Turn right to increase the value.
• Turn left to decrease the value.
• Returns to the previous menu.
• Press and hold for 3 seconds to turn on/off the monitor.
• Exits OSD menu.
Press to bring up the short Information menu. See
the current display settings on page 51
information.
• Press to switch to Adobe RGB (Color Mode) by default.
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page
• Press to switch to sRGB (Color Mode).
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page
• Press to switch to B+W (Color Mode).
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page
Switches the Hotkey Puck G3 to work with different
monitor when multiple monitors are connected. See
Working with more than one monitor (IR Channel Setting)
on page 49
for more information.
45
Description
for more
46.
Viewing
46.
46.
46.
Advertisement
Table of Contents
