Tire Pressure Monitoring System (Tpms) (If Equipped) - Triumph Street Cup Owner's Handbook Manual

General Information
Note:
• With the ABS disabled, the traction
control will still function (unless
traction control has been manually
disabled).
1. ABS control
Scrambler shown)
To Enable the ABS
To enable the ABS system again, repeat
the ABS disable procedure and select
ABS on.
An alternative way to enable the ABS is
to turn the ignition OFF and ON.
44
1
off display (Street
Tire Pressure Monitoring
System (TPMS) (if equipped)
Warning
The daily check of tire pressures must
not be excluded because of the
installation of the TPMS. Check the tire
pressure when the tires are cold using
an accurate tire pressure gauge (see
page 120).
Use of the TPMS system to set
inflation pressures
incorrect tire pressures leading to loss
of motorcycle control and an accident.
Note:
• Tire Pressure Monitoring System
(TPMS) is an accessory option only
available on models equipped with
cast alloy wheels.
Function
Tire pressure sensors are equipped to
the front and rear wheels. These
sensors measure the air pressure inside
the tire and transmit pressure data to
the instruments. These sensors will not
transmit the data until the motorcycle
is traveling at a speed greater than
12 mph (20 km). Two dashes will be
visible in the display screen until the tire
pressure signal is received.
The Tire Pressure Monitoring System
(TPMS) is an accessory equipped item
and must be
authorised Triumph dealer.
may lead
installed by your
to