To Disable The Traction Control; Abs Disable - Thruxton, Thruxton R And Street Scrambler Models Only - Triumph Street Cup Owner's Handbook Manual

To Disable the Traction Control

To disable the traction control setting;
Make sure the motorcycle is stationary
and in neutral.
Turn the ignition to the ON position and
put the engine start/stop switch in the
RUN position.
Press and release the SCROLL button
on the left hand handlebar switch
housing until 'ttcOn' is shown in the
display.
Press and hold the SCROLL button for
more than one second to change
between traction
traction control off.
1. Traction control off display (Street
Twin shown)
control on and
1
General Information
ABS Disable - Thruxton,
Thruxton R and
Street Scrambler Models Only
Warning
Do not attempt to adjust the ABS
settings while the motorcycle is in
motion as this may lead to loss of
motorcycle control and an accident.
Warning
If the ABS is disabled, the brake system
will function as a non-ABS braking
system. In this situation braking too
hard will cause the wheels to lock, and
may result in loss of motorcycle control
and an accident.
It is possible to temporarily disable the
ABS system. The ABS system cannot be
permanently disabled, it will be enabled
when the ignition is turned off and then
on again.
To Disable the ABS
To access the ABS disable function:
Make sure the motorcycle is stationary
and in neutral. Turn the ignition to the
ON position and put the engine start/
stop switch in the RUN position.
Press and release the SCROLL button
until 'AbSOn' is shown in the left hand
display.
Press and hold the SCROLL button for
one second to change between ABS on
and ABS off.
The display shows 'AbSOFF' when the
ABS is disabled.
43