Table of Contents
Advertisement
36
a
Checking/changing/cancelling
timer settings (continued)
e.
Case 1
Program 1
(listed first) 19:00
10:50
Program 2
.
SE
(listed next)
Will be cleared 11:30
Case 2
20 seconds
=
will not be
Program 1
recorded
10:00
10:50
Program 2
11:40
Case 3
:
Will be cut off
Program 1
a8
H
11:30
Program 2 ———
10:45
12:15
i eerie
:
et
rs
Basic Operations
6
Press EXECUTE.
The VCR returns to the original screen. If
there are any other timer settings left in the
TIMER SET/CHECK menu, press POWER to
return to recording standby.
To check the timer settings during timer recording
Press MENU and select TIMER SET/CHECK. After checking, press
EXECUTE to turn off the display.
When the timer settings overlap
The VCR will not record overlapping programs. If any of your timer
settings overlap, change the settings.
Case 1:
Case 2:
Case 3:
if you preset two programs to start recording at the same
time...
The program listed first in the TIMER SET /CHECK menu has
priority over the other program. The timer setting of the lower
priority program will be erased from the TIMER SET/CHECK
menu when the first program begins recording.
If you preset program 2 to start recording at the same time
you preset program 1 to finish recording...
The last 20 seconds of program 1 will not be recorded because
the VCR will enter recording pause for program 2 before
program 1 is finished.
Jf you preset program 2 to start recording before program 1
is finished recording...
Program 2 will start recording before program 1 has finished.
Advertisement
Table of Contents
