Table of Contents
Advertisement
This section shows you how to record TV programs in the most basic
e Manual start, automatic stop recording—"Recording using the quick
timer" (page 29)
e Automatic start and stop recording—"Recording TV programs using
the timer" (page 30)
.
e Automatic start and stop recording using the "PlusCode"—
"Recording TV programs using VCR Plus+" (page 33)
1
Turon your TV and tune in to the
VCR:
e Ifthe TV is connected to the VCR
using the audio/video cable, set the
TV to video input.
e If the TV is connected to the VCR
using only the antenna cable, set the
TV to the VCR channel.
If using a cable box, turn it on.
CH +/-
2
__smsert a tape with its safety tab slid
back to hide the red portion.
3
Select the desired channel by
pressing CH +/-.
@ REC
4 . Start recording by pressing the @
@ STOP
REC button.
When the tape reaches the end, the VCR
automatically rewinds it to the beginning.
To stop recording
Tip
Press Mi STOP.
¢ Toselect channels, you can
also use the number buttons
on the remote commander.
Enter the desired channel
number using the number
buttons, then press ENTER.
28
Basic Operations
Advertisement
Table of Contents
