Parrot ANAFI Ai User Manual page 87

A N A F I A i
When the waypoint is set on the map, you can tap the live image window to display it full screen. The
waypoint will be visible on its center.
You can then tap on the live image or drag and drop the waypoint to set its new position. The new
waypoint location is set on a cylinder with, as a center the drone, and as a radius the distance
between the drone and the last waypoint.
Touch & fly - WP on the live image
Touch & Fly: POI
The Point of Interest (POI) Touch & Fly mode enables you to fly ANAFI Ai around any point on the
map, keeping this particular point at the center of the map. Tap Touch & Fly from the PILOTING
MODE box. The map of your surroundings opens full screen. The live image captured by ANAFI Ai is
minimized in the top right-hand corner of your screen.
Touch & fly - Tracking POI
Long press a point on the map to create a POI for ANAFI Ai. This point is marked as a green square
with a white border. Use the slider on the right of the screen to set the POI ALTITUDE.
When the POI is set on the map, you can tap the live image window to display it full screen. The POI
will be visible on its center.
You can then tap on the live image or drag and drop the POI to set its new position. The new POI
location is set on a horizontal plane which has the same height of the previous POI.
© 2023 Parrot Drones SAS. All Rights Reserved.
87