Parrot ANAFI Ai User Manual page 72

Tap and slide the green corners of the square to adapt the grid to the zone you want to map.
Tab box to select Image Parameters:
Resolution
Exposure
White balance
Tap box to select Flight Parameters:
4G upload
Obstacle avoidance
Final RTH
RTH on data link loss
Altitude
Camera tilt
Front overlap
Side overlap
When you finish mapping the grid, tap Done.
Tap Play to launch the flight.
Orbit
Orbit photogrammetry flights can model an isolated building or structure in 3D. Follow these steps to
program and launch a circular mapping flight.
Tap the map to create a square flight area.
Tap and slide the square to position the object you want to map at the center of the flight area.
Tap and slide the green corners of the square to adapt the flight area to the part surrounding the
target object you want included in the 3D model.
Tab box to select Image Parameters:
Resolution
Exposure
White balance
72
12MP / 48MP
-3.0 to +3/0 EV (DV: 0.0 EV)
Auto / Sunny / Cloudy
Yes / No
Yes / No
Yes / No
Yes / No
From 5 m (DV: 50 m)
-90° to 0.0° (DV: -70°)
20.0% to 90.0% (DV: 80.0%)
20.0% to 90.0% (DV: 60.0%)
FreeFlight 7 Double Grid Photogrammetry
12MP / 48MP
-3.0 to +3/0 EV (DV: 0.0 EV)
Auto / Sunny / Cloudy