Parrot ANAFI Ai User Manual page 56

Hide thumbs Also See for ANAFI Ai:
Table of Contents

Advertisement

Note: Vertical, Horizontal and 360 panoramas require the drone to be flying before you can activate
the shutter. Refer to the
information.
Selecting the Bracketing mode opens three options: 3 photos (-1 EV, +0.0 EV, +1 EV), 5 photos (2 EV
to +2 EV) and 7 photos (-3 EV to +3 EV). When one of these options has been selected, the soft
shutter button of the HUD displays the number of the corresponding option.
Second, select a photo format from the corresponding box of the HUD.
Tap the Imaging box to call the photo settings boxes.
Tap the Resolution box to select 48MP or 12MP.
Tap the last box on the right of the screen to access the photo formats.
Available photo formats for each photo mode are as follows:
Photo (Single):
Timelapse:
GPS Lapse:
Panorama:
Bracketing:
Burst:
Tap a format (JPEG RECT, or JPEG WIDE if available, or any DNG+JPEG format if available) to select it.
Tap the Imaging box again to close the sub-boxes and confirm your choice.
When you are happy with your settings and your framing, press
4 (or tap the soft shutter button of the HUD) to take a photo.
In Photo mode, the screen flashes in black and white to confirm a picture has been taken.
In Timelapse mode, the screen flashes in black and white to confirm a picture has been taken. 0.5 to
60 seconds later, depending on your option choice, the drone takes another photo, and so on until
you press the shutter button again to stop the Timelapse.
56
"Videos, Photos and Panoramas / Generating
JPEG RECT, JPEG WIDE, DNG+JPEG (RECT or WIDE)
JPEG RECT only
JPEG RECT only
JPEG RECT only
JPEG RECT, JPEG WIDE, DNG+JPEG (RECT or WIDE)
JPEG RECT, JPEG WIDE
Photo options
Panoramas" section for more
Media recording on Skycontroller

Advertisement

Table of Contents
loading

This manual is also suitable for:

Freeflight 7

Table of Contents