Parrot ANAFI Ai User Manual page 84

Vehicle landing safety
Warning: Landing a drone on a moving vehicle is a technical gesture, which requires training and
focus. Landing is always one of the most sensitive parts of a flight and performing it in motion makes
it even more crucial.
Always monitor each stage of the Returning to vehicle and Landing sequences carefully, even if
select the Landing ending for Vehicle missions. Always be ready to reclaim control of the drone at
any stage of the flight.
Vehicle missions consume more battery power. Increase the safety margins on your battery readings.
If you normally land with 20% battery power remaining, aim for 30 %.
The landing sequence of a Vehicle mission implies the activation of a landing zone search by ANAFI
Ai. This search can:
•
occur automatically after an RTV, if you select the Landing ending from the Advanced RTH
settings;
•
occur by pilot action on the
distance of 30m from the vehicle. The drone descends to 8m high before starting the search.
•
If the vehicle is moving and the landing zone cannot be acquired after 8 seconds, the drone
automatically lands at a reduced speed. FreeFlight 7 prompts you to adjust the drone's
position.
•
If the vehicle is stopped, the drone continues to descend while searching for the landing
zone. If the landing zone cannot be acquired, FreeFlight 7 prompts you to adjust the drone's
position and the drone lands while tracking the vehicle position.
When the drone acquires the landing zone, the top center of the screen displays a Precise landing
notification.
84
Take-off/Land button when the drone is at a maximum
Landing sequence initiated - Searching landing zone