Parrot ANAFI Ai User Manual page 51

Warning: It is the pilot's responsibility to respect restricted airspace.
When the geo-awareness function is activated, the alert: Geo-awareness – about to enter a no-fly
zone appears on the screen in orange, if you are about to enter a restricted area. The alert appears
10 seconds before you enter the area, estimating your course if you maintain the same heading and
speed.
If the drone is inside a restricted area, the orange alert is replaced by: Geo-awareness – no-fly zone
in red.
The geo-awareness function indicates restricted areas but does not exempt you from being alert to
your environment. For safety reasons, do not fly near airports, highways, train stations, railroads, city
centers and other sensitive areas.
Warning: if the drone's GPS or magnetometer is unavailable, the geo-awareness function will be
inoperative.
Note: some areas have vertical limits. The altitude of the drone being calculated in relation to the
take-off point and not in relation to the ground, it is possible that a difference is present between the
announced limit and the real limit. Take precautions when flying in areas of high terrain: the pilot
remains responsible for respecting the vertical limits of the drone geographical zones.
Tap RESET ALL GEO SETTINGS on the bottom of the page to reset to the default values.
RTH
Through RTH settings, you define the behavior of your drone when the RTH feature is activated. You
can customize the following options:
Return to
End by
Hovering
RTH height
Tap RESET RTH PREFERENCES on the bottom of the page to reset to the default values.
The RTH can be used automatically if the weather is frosty, foggy, or if the battery is disconnected.
© 2023 Parrot Drones SAS. All Rights Reserved.
Warning: Geo-awareness - about to enter a no-fly zone
Take-off point/Pilot position
Hovering/Landing
horizontal slider configurable between 1m and 10m (2m default value)
vertical slider configurable between 20m and 100m (50m default value)
A N A F I A i
51