Parrot ANAFI Ai User Manual page 81

Hide thumbs Also See for ANAFI Ai:

Table of Contents

Stabilize the speed of the vehicle to under 25 km/h (15.5 mph).

Activate the Vehicle mission from the MISSIONS icon on the bottom left of the FreeFlight

7 screen.

Stabilize the direction of the vehicle. If possible, take off from a straight stretch of a road.

Tap

Take-off to make ANAFI Ai take off. It stabilizes 5m above its take-off point and

then tracks and follows the vehicle.

From this point onwards, you cannot exit the Vehicle mission before you land the drone.

For more information, refer to the next sections of this guide for additional details.

You have control over the trajectory and framing of the drone, relative to the referential

of the motion of the vehicle in which you travel with the Skycontroller 4.

Vehicle navigation safety

Always activate and monitor Vehicle missions with great care. It is easy to get disoriented when

controlling a moving vector from another moving vector.

Note: When the tracking is active, the default behavior of ANAFI Ai is to track and follow the vehicle.

It does not hover without commands from the pilot.

Always ensure that your flight plan and the trajectory of your vehicle are clear from obstacles and is

safe. Always retain visual contact with ANAFI Ai, and always be ready to suspend the tracking and

make the drone hover (tap the square

FreeFlight 7 screen, as in the screenshot below).

All green for take-off

Take-off complete, RTH position set

STOP button on the bottom right-hand corner of the

A N A F I A i

Table of Contents

Freeflight 7