Setting Input Signal Switching Procedure - Eizo Rad i Force MX215 Instructions For Use Manual

●

Setting input signal switching procedure

Setting
Auto
Manual
Procedure
1. Select "Tools" from the Adjustment menu, and press
2. Select "Input Selection" from "Tools", and press
3. Select "Auto" or "Manual" with
4. Press to exit.
Note
• If you select "Auto", the monitor enters the power saving mode after all the PCs have entered the power saving mode or
have been switched off.
36
Chapter 7 Reference
The monitor recognizes the connector through which PC signals are input.
When a PC is turned off or enters the power saving mode, the monitor automatically
displays another signal.
The monitor displays the signal from the selected connector despite the signal input. Select
an active input signal with
or .
Function
.
.
.