Table of Contents
Advertisement
3.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
●
To adjust flickering, screen position, and screen size automatically
Procedure
1. Display Pattern 1 in full screen on the monitor using the "Screen adjustment pattern files".
2. Choose "Screen" from the Adjustment menu, and press
3. Choose "Analog Adjustment" from "Screen", and press
4. Choose "Auto Adjustment" from "Analog Adjustment", and press
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
If the screen is not displayed correctly even after performing Auto Adjustment, perform the adjustments
according to the procedures on the following pages. If the screen is displayed correctly, go to
color gradation." (page
4.
Choose "Screen" from the Adjustment menu to perform advanced
adjustments.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars
Procedure
1. Choose "Analog Adjustment" from "Screen", and press
2. Choose "Clock" from "Analog Adjustment", and press
The "Clock" menu appears.
3. Adjust the clock with
Press
or
slowly so as not to miss the adjustment point.
4. Press
to exit.
When blurring, flickering or bars appear on the screen after adjustment, proceed to "To remove flickering or blurring".
18
Chapter 2 Adjusting Screens
20).
or
to eliminate vertical bars.
.
.
.
.
.
"5. Adjusting
Advertisement
Table of Contents
