Setting Displayport Power Save - Eizo Rad i Force MX215 Instructions For Use Manual

5-3. Setting DisplayPort Power Save

The power setting of the DisplayPort of the monitor can be switched in the power saving mode.
Attention
• When "On" is set, the display position on the window may not be positioned correctly when the monitor power is turned on
or off. In such a case, turn the setting to "Off".
Procedure
1. Press to turn off the monitor.
2. Hold down
The "Optional Settings" menu appears.
3. Select "DP Power Save" from "Optional Settings", and press
4. Select "On" or "Off" with
5. Select "Finish" with
6. Press .
The "Optional Settings" menu is closed.
28
Chapter 5 Power Saving Functions
while pressing for at least two seconds to turn on the monitor.
or , and press
or .
.
.