Chapter 1 Introduction; Features - Eizo Rad i Force MX215 Instructions For Use Manual

Chapter 1 Introduction

Thank you very much for choosing an EIZO color LCD monitor.

1-1. Features

• 21.3 inches
• Supports a resolution of 2M pixels (Portrait: 1200 × 1600 dots (H × V))
• Uses high-contrast panel (1500:1).
Enables the display of sharp images.
• Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)
• The RadiCS SelfQC function and the built-in integrated front sensor allow the user to perform the calibration
and Grayscale Check for the monitor independently.
See "Chapter 4 Controlling Monitor Quality" (page
Attention
• When a panel protector is attached, the Integrated Front Sensor cannot be used.
• A high temperature or high humidity environment may affect the measurement accuracy of the integrated front sensor.
We suggest storing and using the monitor under the following conditions.
- Temperature 30˚C or less
- Humidity 70% or less
• Avoid storing or using the sensor where it may be exposed to direct sunlight.
• The CAL Switch function allows the user to select the display mode optimum to the displayed image.
See "Selecting the display mode (CAL Switch mode)" (page
• Selectable DICOM
• The quality control software "RadiCS LE" used to calibrate the monitor and to manage the history is
included.
• The software "ScreenManager Pro for Medical" to adjust the screen using the mouse and keyboard is
included
See "1-2. EIZO LCD Utility Disk" (page
• Frame Synchronous mode supported (59 to 61 Hz)
• Power saving function
This product is equipped with power saving function.
- 0 W power consumption when the main power is off
Equipped with main power switch.
When the monitor is not required, the power supply can be shut off using the main power switch
- Presence Sensor
The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the
monitor, the monitor shifts to the power saving mode automatically and does not display the images on the screen.
Therefore, the function reduces the power consumption. The sensitivity and time until the power saving mode is
activated can be set according to the monitor usage environment and movement of the user.
See "5-4. Setting the Power Saving Mode when a Person Leaves the Monitor" (page
• Long service life LED backlight LCD panel
• Displays HDCP (High-bandwidth Digital Content Protection) protected contents (DisplayPort only).
(page 43) Part 14 complied screen.
8).
24).
13).
29).
Chapter 1 Introduction
7