20 Electrical installation
In this chapter
20.1 About connecting the electrical wiring
20.1.1 Precautions when connecting the electrical wiring
RYMA5+RXYA8~20A7Y1B
VRV 5 heat pump
4P749918-1 - 2023.12
CAUTION
See
"3 Specific installer safety
complies with all safety regulations.
20.1
20.1.1
20.1.2
About the electrical wiring..................................................................................................................................... 127
20.1.3
20.1.4
20.1.5
About electrical compliance .................................................................................................................................. 131
20.1.6
20.2
20.3
20.4
20.5
To route and fix the power supply ......................................................................................................................................... 136
20.6
To connect the power supply................................................................................................................................................. 137
20.7
To connect the external outputs............................................................................................................................................ 138
20.8
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1
Making sure the power supply system complies with the electrical
specifications of the units.
2
Connecting the electrical wiring to the outdoor unit.
3
Connecting the electrical wiring to the indoor unit.
4
Connecting the main power supply.
DANGER: RISK OF ELECTROCUTION
WARNING
The appliance MUST be installed in accordance with national wiring regulations.
WARNING
▪
All wiring MUST be performed by an authorised electrician and MUST comply
with the national wiring regulation.
▪
Make electrical connections to the fixed wiring.
▪
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.
WARNING
ALWAYS use multicore cable for power supply cables.
20
Electrical installation
|
4
instructions" [
14] to make sure this installation
Installer and user reference guide
125