Mounting Position Of Sheet Metal Nuts In Screw-Type Connections; Tightening Torques; Cable Entries, Sealing Plugs And Thread Adapters - Siemens SIMOTICS A 1FU9 Operating Instructions Manual

Electrical connection
7.3 Tightening torques
7.2.3.1

Mounting position of sheet metal nuts in screw-type connections

Cable glands with connecting thread in the terminal box (EN 50262)
7.3

Tightening torques

Note the information in Chapter Tightening torques (Page 133).
7.3.1

Cable entries, sealing plugs and thread adapters

Note the following when mounting:
• Avoid damaging the cable jacket.
• Adapt the tightening torques to the cable jacket materials.
Observe the documentation for tightening torques of the cable entries and sealing plugs for
direct mounting at the machine as well as additional glands (e.g. adapters).
74
②
O ring
③
Mounting position of metal-sheet
nuts
②
O ring
Operating Instructions, 10/2023, A5E46712792A
1FU9