Table of Contents
Advertisement
Assembly
6.3 Preparing for installation
Material damage caused by improper handling
Mounting parts such as temperature sensors or speed sensors are attached to the machine and
could be ripped off or destroyed as a result of improper handling. This could lead to machine
malfunctions, extending even to total loss of the machine.
• Use suitable steps when carrying out installation work on the machine.
• Do not stand on cables or attachments during installation. Do not use attachments as steps.
Electromagnetic fields when operating electrical power equipment
Electrical power equipment generate electromagnetic fields during operation. Potentially
lethal malfunctions can occur in medical implants, e.g. pacemakers, in the vicinity of
electrical power equipment. Data may be lost on magnetic or electronic data carriers.
• Protect the personnel working in the plant by taking appropriate measures, such as erecting
identifying markings, safety barriers and warning signs and giving safety talks.
• Comply with all of the national health and safety regulations.
• It is forbidden for people with pacemakers to be close to the machine.
• Do not carry any magnetic or electronic data media.
6.3
Preparing for installation
6.3.1
Requirements for installation
The following requirements must be satisfied prior to starting installation work:
• Staff have access to the operating and installation instructions.
• The machine is unpacked and ready for mounting at the installation location.
• Measure the insulation resistance of the winding before starting any installation work. If the
insulation resistance lies below the specified value, take appropriate remedial measures.
These remedial measures may necessitate the machine being removed again and
transported.
6.3.2
Safety instructions
Note
Note also the technical data on the rating plates on the motor enclosure.
54
Operating Instructions, 10/2023, A5E46712792A
1FU9
Advertisement
Table of Contents
