Operation
9.1
Reference to chapter Safety instructions
Comply with the following when carrying out any work on the machine:
• Comply with the general safety instructions (Page 27).
• Comply with the applicable national and sector-specific regulations.
• When using the motor within the European Union, comply with the specifications laid down
in EN 50110‑1 regarding safe operation of electrical equipment.
9.2
Safety instructions for operation
9.2.1
Safety instructions in operation - uncovered, rotating parts
Risk of injury due to rotating parts
Rotating parts are dangerous. Touch protection against rotating parts is no longer guaranteed
if covers are removed. Touching rotating parts can cause sparking with subsequent ignition of
an explosive atmosphere resulting in death, serious injury or material damage.
• Carefully ensure that all of the covers are closed while operational.
• First switch off and disconnect the machine if you must remove covers. Carefully comply with
the "5 safety rules (Page 27)".
• Only remove the covers when the rotating parts have come to a complete standstill.
1FU9
Operating Instructions, 10/2023, A5E46712792A
9
91