Dangerous voltage when the rotor rotates
There are dangerous voltages at the terminals while the machine rotor rotates and immediately
afterwards.
You must observe the following safety instructions to prevent death, injury or material damage:
• Do not touch the terminals while the rotor is rotating and immediately afterwards.
• To discharge the winding, after the rotor comes to a standstill, connect the winding to
7.2.3
Cable glands
Cable glands with (sheet metal) nuts (EN 50262)
Cable glands with reductions and (sheet metal) nuts (EN 50262)
1FU9
Operating Instructions, 10/2023, A5E46712792A
WARNING
ground potential.
7.2 Connecting the machine
①
Nut
②
O ring
①
Nut
②
O ring
Electrical connection
73