Installing The Engine - KTM 125 Duke 2013 Repair Manual

16 ENGINE
16.2

Installing the engine

–
Remove screws
–
Pull off the radiator pipe and hang it to one side.
304913-10
–
Position the floor jack under the engine and fix it using the special tool.
Floor jack attachment (75029055000) (
304914-10
–
Remove fitting
–
Remove fitting
–
Hang ground wire
304915-10
–
Lower the engine.
Info
Watch out for clutch lever
You should have an assistant for this step.
Make sure that the engine is sufficiently secured against falling over.
Protect the frame and attachments from damage.
304916-10
Preparatory work
–
Raise the engine onto the special tool and fix it.
Floor jack attachment (75029055000) (
.
cl
.
cm
.
cn
to one side.
co
.
cp
p. 275)
p. 275)
103