Replacing The Cap; Using The Tablet Pc Pen And Reserve Pen - Toshiba Tecra M4-103 User Manual

Replacing the cap

The AccuPoint cap is an expendable item that should be replaced after
prolonged use.
1. To remove the AccuPoint cap, firmly pinch the cap and pull it straight
up.
2. Position a new cap on the peg and press it into place.
The peg is square, so be careful to align the cap's square hole with the
peg.

Using the Tablet PC Pen and Reserve Pen

You can use the Tablet PC Pen to execute actions and enter data. Hold the
Tablet PC Pen in a natural position and tap, press or trace on the screen
lightly. Before you begin using your computer for the first time, you will need
to calibrate the Tablet PC Pen.
Some computers in this series are equipped with a Reserve Pen.
TECRA M4
Removing the AccuPoint cap
Eraser button
Pen point
The Tablet PC Pen (left) and Reserve Pen (right)
Pen button
Operating Basics
Pen button
Pen point
4-3