Removing Discs - Toshiba Tecra M4-103 User Manual

5. Push the center of the disc tray to close it. Press gently until it locks into
place.
■
Always keep fingers away from the sides of the tray when closing the
tray of an optical drive (CD/DVD drive, CD-RW drive, Multi-drive or
equivalent drive) to avoid pinching your fingers.
■
If the CD/DVD is not seated properly when the disc tray is closed, the
CD/DVD might be damaged. Also, the disc tray might not open fully
when you press the eject button.

Removing discs

To remove the CD/DVD, follow the steps below.
Do not press the eject button while the computer is accessing the media
drive. Wait for the Slim Select Bay indicator to go out before you open the
disc tray. Also, if the CD/DVD is spinning when you open the disc tray, wait
for it to stop before you remove it
1. To pop the disc tray partially open, press the eject button. Gently pull
the disc tray out until it is fully opened.
When the disc tray pops open slightly, wait a moment to make sure the CD/
DVD has stopped spinning before pulling the disc tray fully open.
TECRA M4
Closing the CD/DVD disc tray
.
Operating Basics
4-18