Toshiba Tecra M4-103 User Manual page 31

Low battery
automatic
hibernation
Heat dispersal
Optical media drive
power icon
HDD Protection
This function does not guarantee that the HDD will not be damaged.
TECRA M4
When battery power is exhausted to the point that
computer operation cannot be continued, the
system automatically enters Hibernation and
shuts down. You can specify the setting in the
Setup Action tab in TOSHIBA Power Saver.
To protect from overheating, the CPU has an
internal temperature sensor. If the computer's
internal temperature rises to a certain level, the
cooling fan is turned on or the processing speed
is lowered. Use the Cooling Method item of the
Basic Setup tab in TOSHIBA Power Saver.
■
Maximum
Performance
■
Performance
■
Battery optimized
Use this to turn the power of the optical media
drive on or off. Clicking on the optical media drive
icon on the taskbar will turn the power of the
optical media drive on or off. If the optical media
drive power is off, the disc tray will not open even
if the eject button is pushed. The power of the
optical media drive can be turned on using the
optical media drive icon.
Using the acceleration sensor built in the
computer, HDD Protection detects vibration,
shocks, and those signs in the computer, and
automatically moves the HDD (Hard Disk Drive)
head to the safe position to reduce the risk of
damage that could be caused to the disk by
head-to-disk contact. Refer to the
Disk Drive (HDD) Protection
Operating Basics, for details.
Introduction
Turns on fan first, then if
necessary lowers CPU
processing speed.
Uses a combination of
fan and lowering the CPU
processing speed.
Lowers the CPU
processing speed first,
then if necessary turns on
the Cooling Method.
Using the Hard
section in Chapter 4,
1-14