Table of Contents
Advertisement
6. Slide the battery release latch (➀) to free the battery pack for removal
(➁), then slide out the battery pack.
7. Return your computer to the upright position.
Installing the battery pack
To install a battery pack, follow the steps below.
Do not touch the battery release latch while holding the computer. Or you
may get injured by the dropped battery pack by unintentional release of the
battery release latch.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Close the LCD display panel and turn the computer upside down.
4. Insert the battery pack (➀).
5. Secure the battery pack lock. Check the battery lock was changed to
the lock position ( ) (➁).
Battery pack
6. Return your computer to the upright position.
TECRA M4
Securing the battery cover
Power and Power-Up Modes
Battery lock
6-15
Advertisement
Table of Contents
