Table of Contents
Advertisement
2. The CD/DVD extends slightly over the sides of the disc tray so you can
hold it. Hold the CD/DVD gently and lift it out.
3. Push the center of the disc tray to close it. Press gently until it locks into
place.
How to remove CD/DVD when the disk tray will not open
Pressing the eject button will not open the disc tray when the computer
power is off. If the power is off, you can open the disc tray by inserting a
slender object (about 15 mm) such as a straightened paper clip into the
eject hole just to the right of the eject button.
Turn off the power before you use the eject hole. If the CD/DVD is spinning
when you open the disc tray, the CD/DVD could fly off the spindle and
cause injury.
TECRA M4
Removing a CD/DVD
Eject hole
Manual release with the eject hole
Operating Basics
4-19
Advertisement
Table of Contents
