Sony IPELA NSR-1200 User Manual page 89

• Guide lines are shown in 15-minute intervals, and by
dragging the edges of each scheduled time slot, you
can change the start and end times of the action.
When you want to configure the time in detail, click
[Edit] and make adjustments in the Schedule
Configuration dialog box that appears.
• Selecting each time slot displays information such as
the camera target for recording and the duration in
area H.
When date and time view:
In this view, a list of the schedules that have been
configured are displayed.
• Selecting each schedule displays information such
as the camera target for recording and the duration in
area H.
F Edit
This displays the Schedule Configuration dialog box for
changing schedule settings.
G Remove
This deletes the selected schedule.
H Show Configuration Information
This displays the configuration information of the selected
schedule.
I Apply
This saves the settings.
J Cancel
This cancels the changes to the settings.
K Close
This closes the screen.
Setting Items of New Record Dialog Box
This dialog box is displayed by clicking [New Record] on
the Schedule screen (page 89).
The items that are displayed differ depending on the type
of recording.
After configuring each item, click [OK].
Screen Example: When alarm recording (recurrent schedule)
A B C
G
A Schedule Record/Alarm Record/Event Record
Select the type of schedule to configure.
B Name
Enter the name of the schedule. It can be up to 32
characters long.
C Enable
Select the check box to enable this schedule.
D Schedule
The settings differ depending on whether you are
configuring a recurrent schedule or a schedule for a
specific date and time.
When recurrent schedule:
Select the check boxes for the days you want to run the
schedule, and configure a start time and end time for
the schedule.
The range that can be specified is 00:00:00 to 23:59:59
(hours/minutes/seconds).
When schedule for a specific date and time:
Configure the start date and time and end date and time
to apply the schedule.
D
EF
H
I J
Configuring Recording Schedules
89