Sony IPELA NSR-1200 User Manual page 101

2
Switch to recurrent view or date view.
3
Select [Action] in the tree, and select [New Action].
The New Action dialog box appears.
4
Configure each item, and click [OK].
1
4
For details on each of the items, refer to "Setting Items
of New Action Dialog Box (Event/Alarm Action)"
(page 101).
1 Enter a name for the event/alarm action.
2 Select the check boxes for the days you want to run
the event/alarm action, and configure a start time
and end time for the event/alarm action.
3 Configure the timing for ending the action.
4 Configure the event that will be the trigger for the
action.
5 Configure the action to perform.
6 Click [OK].
The event/alarm action is created.
5
Click [Apply].
The event/alarm action is saved.
For details on how to view the schedule, refer to "Setting
Items of Schedule Screen" (page 88).
Setting Items of New Action Dialog Box
(Event/Alarm Action)
This dialog box is displayed by selecting [Action] from the
tree in the Schedule Configuration screen, and then
clicking [New Action].
After configuring each item, click [OK].
Screen example: When recurrent event/alarm
action:
A
2
3
5
A Schedule Name
Enter the name of the event/alarm action. It can be up to 32
characters long.
6
B Enable
Select the check box to enable this event/alarm action.
C Schedule
The settings differ depending on whether you are
configuring a recurrent event/alarm action or an event/
alarm action for a specific date and time.
When recurrent event/alarm action:
Select the check boxes for the days you want to run the
event/alarm action, and configure a start time and end
time for the event/alarm action.
The range that can be specified is 00:00:00 to 23:59:59
(hours/minutes/seconds).
When event/alarm action for a specific date
and time:
Configure the start date and time and end date and time
to apply the event/alarm action.
D Action Duration
Configure the duration for the action.
B
F G
Configuring Action Settings
C
DE
H I
101