Sony IPELA NSR-1200 User Manual page 42

Caution
When specifying host names, be sure to configure DNS
settings so that the host names can be resolved.
Port
Enter the port number on the camera side for when
connecting with the camera. The default setting is "80."
Proxy
Set this when the camera will be accessed via a proxy
server.
Enable
Select the check box, and configure the following
items.
IP Address
Enter the IP address for the proxy server.
Port
Enter the port number for the proxy server.
Preview
This displays the images from the camera.
Apply
This saves the settings.
Cancel
This cancels the settings.
Close
This closes the screen.
Setting Items of Multiple Camera
Registration Dialog Box
This dialog box displays the results of the automatic
search, and allows you to register the detected devices
simultaneously.
It is displayed by selecting [Open Multiple Camera
Registration Window] in the Camera Auto Registration
dialog box, and clicking [OK].
After configuring each item, click [Register].
42
Registering Devices
Caution
Analog cameras without input signals will not be detected
with the automatic search.
Network
A list of the devices connected to the network selected in
the drop-down menu is displayed.
Reload
This performs the automatic search again.
Take care because apart from the user name and password
of the administrator, all of the values you entered up until
now will be replaced with the results obtained with the
automatic search.
Input All
This displays the Input All dialog box (page 43).
Show
This allows you to use the following conditions to narrow
down the display of devices shown in the device list.
Unregistered Cameras
This displays only the devices that have not yet been
registered to NSR.
Registered Cameras
This displays only the devices that have already been
registered to NSR.
All Cameras
This displays all of the devices detected with the
automatic search.
Device List
This displays a list of the devices detected with the
automatic search.
Target
Select the check boxes of the devices to register to
NSR.
Thumbnail
This displays thumbnail images from the camera.
Images may not be displayed in some cases.
Model Name
This displays the type of device.
Camera Name
This displays the device name.
IP Address
This displays the IP address of the device.
Port
This displays the port number on the device side for
when connecting with the device.
The default setting is "80."
User Name
Enter the user name for connecting to the device.