Sony IPELA NSR-1200 User Manual page 45

Notes
• The setting items and selectable values differ depending
on the camera.
• For details on settings for the SNC-XX600 series (XX
represents two letters), see "Setting Items of [Video] Tab
(for the SNC-XX600 series)" (page 46).
Video Channel
In the case of a camera server with multiple channels (SNT
series, etc.), the video channel to use is displayed.
E-Flip
Configure to enable the E-Flip function for flipping the top
and bottom of images output from the camera.
E-Flip (Recorder) is the image flip function on RealShot
Manager Advanced. E-Flip (Camera) is the image flip
function on the camera.
Caution
When the camera image is flipped due to a change in the
E-Flip (Camera) setting, the display area will change. Be
sure to reconfigure mask settings, motion detection
settings, and preset positions.
Audio Channel
Select the analog camera audio channel to tie to the analog
camera.
You can also apply one setting to multiple analog cameras.
Schedule Record
Configure settings related to images for when scheduling
recording.
Codec
Set the image codec for the camera. Select JPEG,
MPEG4 or H.264.
Image Size
Select the resolution for the camera.
Image Quality (for JPEG)
Select the image quality for images of the camera.
Bit Rate (for MPEG4 or H.264)
Select the bit rate for images of the camera.
Frame Rate
Select the frame rate for images of the camera.
Alarm/Event Record
Configure settings related to images for when recording an
alarm or event.
Codec
Set the image codec for the camera. Select JPEG,
MPEG4 or H.264.
Image Size
Select the resolution for the camera.
Image Quality (for JPEG)
Select the image quality for images of the camera.
Bit Rate (for MPEG4 or H.264)
Select the bit rate for images of the camera.
Frame Rate
Select the frame rate for images of the camera.
Monitoring
Configure settings related to images for when monitoring.
Codec
Set the image codec for the camera. Select JPEG,
MPEG4 or H.264.
Image Size
Select the resolution for the camera.
Image Quality (for JPEG)
Select the image quality for images of the camera.
Bit Rate (for MPEG4 or H.264)
Select the bit rate for images of the camera.
Frame Rate
Select the frame rate for images of the camera.
Light Funnel
Select the mode to use when the camera has a light funnel
function.
Note
The light funnel function may not be able to be used
depending on the conditions. For details, check the user's
guide for the camera.
Threshold
Select the brightness for when to switch to night mode.
Hold Time
Select the time for responding to changes in
brightness.
View-DR
Select whether the View-DR function is turned on or off
for cameras equipped with this function.
Configuring Camera Video Settings
45