Details Of Each Screen - Sony IPELA NSR-1200 User Manual

Details of Each Screen

Setting Items of Device Configuration
Screen
This screen displays a list of the devices registered to NSR.
It is displayed by clicking [Device] in the Configuration
screen.
B D C
A
A Tree Structure
This displays a list of the devices registered to NSR in a
tree structure.
Selecting a device from the tree structure displays the
items corresponding to the selected device in area E.
(Camera Auto Registration)
B
This displays the Camera Auto Registration dialog box for
automatically searching for and registering cameras
connected to the network. For details, refer to the
Installation Manual (separate document).
(Add)
C
This displays the Add Device dialog box (page 43) for
registering a device manually.
(Delete)
D
This deletes a device.
Select the device you want to delete from the tree structure
or device list, and click this button to delete the device.
E Device List
This displays a list of the devices belonging to the device
group selected in the tree structure on the left.
E
Setting Items of the [General] Tab
This tab allows you to change the settings of the device
selected in the tree structure on the left.
After configuring each item, click [Apply] to save your
settings.
Name
Enter up to 32 characters (excluding \ / : , ; * ? " < > ¦ [ ])
to assign a name to the device to be added.
Type
This item displays the device type. It cannot be changed.
User Name
Enter the user name that is used for authentication and
configured on the device.
Password
Enter the password that is used for authentication and
configured on the device.
Caution
The user name and password for a device cannot be
changed from NSR. To change them, access the device
directly from a Web browser. If you change the user name
and password for a device registered to NSR, you must
also change the configurations in NSR.
Global ID
Enter a number for the global ID.
In NSR and RealShot Manager Advanced, cameras are
managed by assigning IDs to the connected cameras
individually.
In addition, in a system in which multiple NSR and
RealShot Manager Advanced are used as servers, all the
cameras connected to each server are assigned an ID that
is unique within the system. You can use a global ID to
specify the cameras to perform monitoring directly from
RealShot Manager Advanced of a remote client without
being aware of each server.
IP Address
Enter the IP address or the host name for the camera.
41
Registering Devices