Sony IPELA NSR-1200 User Manual page 117

Wide-angle/Telephoto Zoom
This zooms images in the wide-angle and telephoto
directions.
[W] is the wide-angle end (zoom out), and [T] is the
telephoto end (zoom in).
Click between "W" and "T" to zoom to an absolute
value.
If you click this button, you can perform pan, tilt,
zoom, and centering with the mouse.
You can also use the following shortcut keys.
Shortcut keys Operations
Ctrl + Left-click Moves the camera so that
the selected point becomes
at the center.
Ctrl + Left-click and drag Displays a red box, and
releasing the mouse button
enlarges the portion of the
image inside the box to fill
the window.
Ctrl + Rotate the wheel Zooms in.
1)
forward
Ctrl + Rotate the wheel Zooms out.
1)
backward
1) Zooming in and zooming out in digital are not supported.
Pan/Tilt
This moves the camera up, down, left, or right.
Preset
This moves the camera to the selected preset position.
Tour
This performs the selected camera tour.
[Adjust] Tab
This allows you to adjust the images from the camera.
Focus
Select [Auto] to always adjust the focus automatically.
You can click [-] or [+] to cancel the auto state, and
adjust the focus manually. Adjust the focus in the [+]
direction to focus on a subject that is close and adjust
the focus in the [-] direction to focus on a subject that
is far away.
Brightness (EV)
Select [Full auto] to always adjust the brightness
automatically. The backlight compensation turns on or
off each time you click [BLC ON].
If you select [Shutter Priority], the shutter speed will
remain fixed while the aperture is adjusted
automatically.
If you select [Iris Priority], the aperture will remain
fixed while the shutter speed is adjusted automatically.
You can click [-] or [+] to cancel the auto state, and
adjust the brightness manually. Adjust the brightness
in the [+] direction to make the images brighter and
adjust the brightness in the [-] direction to make the
images darker.
Day/Night
Select day mode or night mode for cameras equipped
with a day/night function.
When [Day Mode] is selected, the camera operates in
day mode.
When [Night Mode] is selected, the camera operates in
night mode.
When [Auto] is selected, the camera operates in day
mode under normal conditions. The camera
automatically enters night mode under dark
conditions.
117
Monitoring