Sony IPELA NSR-1200 User Manual page 14

Date Format
Select the format for the date and time.
Enable NTP Server
Select the check box to enable the NTP server of NSR.
Note
If you enable the NTP server of NSR, configure settings to
obtain information from other NTP servers as well. If you
do not configure the settings, the clock may deviate
dramatically.
Synchronize with NTP Server
Select the check box to obtain the current time from
another NTP server.
IP Address
Enter the IP address of the NTP server from which to
obtain the information.
Synchronize with Windows Server
When a Windows server is used as the NTP server,
select the check box when synchronization of the time
is not possible.
Selecting this check box forces the time to be
synchronized with the Windows NTP server.
Current Synchronization
This displays the IP address of the NTP server from
which the current information is being obtained.
Time Zone
Select the region to configure the date and time.
Note
There is no setting for enabling or disabling daylight
saving time. If you select a time zone in which daylight
saving time is observed, the clock is adjusted
automatically for daylight saving time.
Setting Items of Network Device Menu
Screen
The network settings consist of "General Network" for
setting general settings, and "Network Device 1 to 3" for
setting LAN connectors.
Select the network you want to configure, and click [OK].
14
Changing Initial Settings with the Setup Menu
Caution
Connect the following devices to the LAN connectors.
1)
LAN1: Network camera
1)
LAN2: Network cameras
using a different segment from LAN1.)
1) Connect remote clients to the network specified with the [Network
Interface for Remote Client] setting (either LAN1 or LAN2) in the Server
Configuration screen. For details on the Server Configuration screen, see
"Configuring Settings Related to Servers" (page 20).
2)
LAN3: iSCSI storage
2) For details on using iSCSI storage, contact your Sony dealer.
xSetting Items of General Network Screen
Configure each item, and click [OK].
Primary DNS
Enter the IP address for the primary DNS (Domain Name
Server).
Do not enter this if there is no primary DNS, or if it is not
required.
Secondary DNS
Enter the IP address for the secondary DNS. Do not enter
this if there is no secondary DNS, or if it is not required.
Default Gateway
Enter the IP address for the default gateway. Do not enter
this is if there is only a local network or there is no need to
connect to another network.
Hosts
If you need to register a host name, enter the IP address and
host name as a set, and click [Add] to add the host to the
list.
(LAN2 can only be used when