Table of Contents
Advertisement
4. Touch Start/Pause button to confirm
the selection.
9.4 Change the time of the
day after the first activation
1. Touch the button Extra Rinse and the
button Time Save at the same time
for some seconds.
The hour digits flash.
10. DAILY USE
10.1 Using weight sensors
10.2 Before activating the
appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
10.3 Activating the appliance
and setting a programme
1. Press button Auto Off to activate the
appliance.
2. Turn the programme knob to the
necessary programme or touch one
of the Memory buttons to set a
memorised programme.
The programme indicator comes on.
The indicator of Start/Pause button
flashes with red colour.
The display shows the default
temperature and spin and the empty
indicator bars of the available functions.
3. If it is necessary, touch Temp. button
and Spin button to change the water
temperature and the spin speed.
4. If necessary, touch the other buttons
to add some functions or to set a
delayed start.
The display shows the symbol of the set
function and the digit shows the delayed
time.
WARNING!
Refer to Safety chapters.
For a correct operation of
the weight sensor, activate
the appliance and set the
programme BEFORE you
put the laundry in the drum.
2. Turn the programme knob to change
the hour.
3. Touch Start/Pause button to confirm
the selection.
The minute digits flash.
4. Turn the programme knob to change
the minutes.
5. Touch Start/Pause button to confirm
the selection.
10.4 Loading the laundry
1. Open the appliance door.
The display shows the maximum load for
the set programme
the laundry
you put in the drum.
The text bar on the display tells to add
the laundry.
2. Put the laundry in the drum, one item
at time. Shake the items before you
put them in the drum.
On the display the weight of the laundry
updates by steps of kg 0.5. The weight is
indicative and changes with the type of
the laundry.
If you put in the drum more
laundry than the maximum
load, the text bar tells that
you have put more than the
maximum load. You can
wash your laundry but the
water and energy
consumption increase.
Remove some items to have
the best consumption and
washing performance The
overload indication is
available only for
programmes with a
maximum load lower than
the appliance maximum
load.
3. Close the door.
The text bar tells the percentage of
detergent to use.
This data is indicative and refers to the
detergent quantity for a maximum load
that the manufacturer recommends.
4. Make sure that no laundry stays
between the seal and the door.
ENGLISH
17
and the weight of
Advertisement
Table of Contents
