Product Overview; Controls - Toro 75501 Manual

Product Overview

1. Discharge handle
2. Operator seat
3. Height-of-cut lever
4. Steering Wheel
5. Brake pedal

Controls

Become familiar with all the controls before you start
and operate the machine.
Control Panel
1. Information display
2. USB port
3. Drive-mode switch
4. Reverse-mowing
operation button
Key Switch
The key switch has 2 positions: O
key switch to start or shut off the machine.
Figure 6
6. Traction pedal
7. Charger receptacle
8. Anti-scalp roller
9. Control panel
10. Grass catcher
Figure 7
5. Cruise-control operation
button
6. Blade-control switch
7. Key switch
and O . Use the
N FF
Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades.
Brake Pedal
Use the brake pedal to stop or slow the machine.
Parking Brake
To engage the parking brake, fully press down the
brake pedal, lift the locking lever, and remove your
g368368 foot from the pedal.
g368367
Fully press down the brake pedal to release the
parking brake and pedal.
If the machine moves while the parking brake is
engaged, the parking brake needs to be adjusted.
Contact your Authorized Toro Dealer for details.
Traction-Control Pedal
Use the traction-control pedal to vary the ground
speed of the machine. The farther you press the
pedal, the faster the machine moves.
Drive-Mode Switch
The drive-mode switch has 3 positions: F
N , and R
EUTRAL
be in the F
ORWARD
mower blades.
15
Figure 8
. The drive-mode switch must
EVERSE
position before engaging the
g368925
,
ORWARD